Use this Board Foot Calculator to tally lumber from entered thickness, width, length and board count. Add separate lines for different sizes or lengths, identify whether the numbers are supplier tally dimensions or measured rectangular dimensions, then review each board, each line and the combined BF total. It performs transparent arithmetic; it does not select a grading rule, convert nominal sizes to dressed sizes or reproduce a supplier’s invoice rounding automatically.
Key Takeaways
- For entered thickness and width in inches and length in feet: BF = thickness × width × length × board count / 12.
- One board foot is a dimensional equivalent of 144 in³, or 1/12 ft³. One MBF means 1,000 BF on this page.
- Supplier tally dimensions can differ from measured finished dimensions. Changing the basis label does not change any numbers.
- Each line contains identical boards. Sum unrounded line tallies before displaying the combined total.
- The calculator does not add waste, round to a sale increment, deduct defects, estimate usable cuttings or scale logs.
A board foot, abbreviated BF, represents the dimensional equivalent of a board 1 in thick, 12 in wide and 12 in long. Multiplying those dimensions gives 144 cubic inches. A board can have a different shape and still represent the same number of board feet: doubling one dimension while halving another keeps the rectangular volume equivalent unchanged.
Board feet are not the same as a count of boards or linear feet. Ten narrow boards and ten wide boards can have the same count and length but different board-foot tallies. Similarly, 100 linear feet of 1 × 6 in material and 100 linear feet of 2 × 6 in material produce different dimensional tallies. Thickness and width belong in the calculation.
Let T be the entered thickness in inches, W the entered width in inches, L the entered length in feet and Q the whole-board count. The calculation is BF_each = T × W × L / 12, and BF_line = BF_each × Q. Sum the line results to obtain the total.
The divisor of 12 is specific to this mixture of units. If all three dimensions are in inches, divide their product by 144 instead. The length conversion contributes another factor of twelve, so the two formulations agree. Do not use the divisor of 12 with three inch dimensions; that would overstate the result twelvefold.
Each dimension in the tool has an independent unit selector: inches, feet, yards, millimeters, centimeters or meters. The model converts the dimensions before calculating. Changing a selector retains the entered number. For example, change 8 ft to 2.4384 m if you mean the same length; changing 8 ft to 8 m changes the board being tallied.
Supplier tally dimensions versus measured dimensions
Choose the measurement basis before entering a schedule. Supplier tally dimensions are the thickness, width and length agreed for that tally. They may reflect a product description or purchasing convention rather than the exact delivered rectangular cross-section. Measured dimensions are the dimensions you actually measured for a uniform rectangular board. The arithmetic is the same, but the interpretation is different.
The basis selector records that distinction. It does not replace entered values, apply a nominal-size table or decide which convention a contract requires. Confirm the sizes, measurement method and rounding treatment on the quotation or tally sheet. If a trade rule calls for a particular treatment, enter the applicable tally dimensions and document the rule separately rather than assuming the calculator applies it.
USDA Forest Service research illustrates that board-foot product tallies and actual cubic wood volume need not have a fixed relationship when different nominal product dimensions are involved. Accordingly, the cubic-foot and cubic-meter results here are labeled entered-dimension tally equivalents. They are not automatically measurements of the actual wood delivered.
A single-board comparison
Consider one fictional board entered as 2 in thick, 4 in wide and 8 ft long. Its dimensional tally is 2 × 4 × 8 / 12 = 5.333333 BF after display rounding. That result follows the supplied 2 × 4 dimensions; the calculator does not infer a smaller finished cross-section.
Now consider a separate measured rectangular board with thickness 1.5 in, width 3.5 in and the same 8 ft length. The geometric equivalent is 1.5 × 3.5 × 8 / 12 = 3.5 BF. Neither calculation establishes the correct supplier invoice. They answer different dimension-basis questions. Run them separately and retain the basis with each result instead of combining incompatible conventions in one tally.
The default fictional schedule contains ten boards, entered as 1 in thick × 12 in wide × 8 ft long. Each board is 1 × 12 × 8 / 12 = 8 BF. Multiplying by ten gives 80 BF. The tool also reports 0.08 MBF, because MBF is explicitly defined here as one thousand board feet.
The dimensional cubic-volume equivalent is 80 / 12 = 6.666667 ft³, or 80 × 0.002359737216 = 0.18877897728 m³ before display rounding. If the entries are supplier tally sizes, those figures remain tally-volume equivalents. A physical volume measurement would require the actual relevant geometry, including any nonrectangular profile or missing material.
A mixed-size lumber tally
Keep the ten boards above as line one. Add line two for four boards entered as 1.25 in thick × 6 in wide × 10 ft long. Each second-line board is 1.25 × 6 × 10 / 12 = 6.25 BF. Four give 25 BF. The combined schedule therefore totals 80 + 25 = 105 BF across fourteen boards.
The combined result is 0.105 MBF, with an entered-dimension equivalent of 8.75 ft³ or 0.24777240768 m³. If a fictional quotation states $4.50 per BF on this exact tally basis, multiplication outside the calculator gives 105 × $4.50 = $472.50 before any separately stated charges. That price is an arithmetic illustration, not a current market rate. This calculator itself does not calculate prices, tax, delivery or currency conversions.
Use a new line whenever thickness, width or length changes. A line count repeats one identical size; it cannot describe random-width boards unless they truly share the entered width. Up to six lines are supported. A larger schedule can be split into clearly named batches, with the unrounded totals retained in the project’s agreed record.
How to enter quarter-thickness notation
Quarter notation can be translated arithmetically before entry: 4/4 in is 1 in, 5/4 in is 1.25 in, 6/4 in is 1.5 in, 8/4 in is 2 in and 12/4 in is 3 in. The decimal parser expects a decimal value, so enter 1.25 rather than the text “5/4.”
That arithmetic does not establish a delivered finished thickness. Drying, surfacing, product descriptions and the supplier’s stated tally basis can affect which number belongs in a particular calculation. Confirm the applicable thickness and document it. This page does not automatically treat all boards below one inch as one inch, round widths, select standard lengths or certify a hardwood or softwood grading tally.
Suppose ten fictional measured rectangular boards each have thickness 25 mm, width 200 mm and length 2 m. Convert the first two dimensions to meters: 0.025 × 0.2 × 2 = 0.01 m³ per board. Ten boards have 0.1 m³ of modeled rectangular volume. Dividing by the dimensional equivalent of one BF gives approximately 42.3776 BF, or 0.042378 MBF after display rounding.
The international inch is exactly 0.0254 m. Therefore 144 in³ = 0.002359737216 m³, and the geometric relationships used here are 1 BF = 144 in³ = 1/12 ft³ and 1 MBF = 1,000 BF. The interface converts dimensions independently, so you may enter a mixed-unit schedule without manually rounding the converted sizes first.
These exact unit relationships do not convert a nominal sales tally into measured delivered wood. For example, entering a nominal thickness still carries that nominal basis into the computed cubic-volume equivalent. Unit accuracy cannot repair an incorrect measurement basis.
Avoid rounding each board before summing
A board entered as 1 in × 1 in × 1 ft represents 1/12 BF. Three such boards represent exactly 0.25 BF. Rounding each board to 0.08 BF first and then multiplying would give 0.24 BF. That difference is a rounding artifact, not a change in the entered dimensions.
The calculator retains exact decimal rational values through line multiplication and summation, then rounds for display. It does not apply a supplier’s commercial tally rounding. If a quotation or agreed procedure specifies rounding by board, line or total, reconcile that procedure separately. Keep the underlying calculation and the later invoice adjustment distinct so any difference can be explained.
This page begins with sizes and counts that you supply. It does not derive a framing layout, cutting schedule or extra-piece allowance. Board feet alone cannot tell you whether a list contains the lengths needed for your cuts. Kerf, end trim, defects, offcuts, grain requirements and product availability can change an order without changing a theoretical finished-part volume.
Use the distinct Lumber Calculator for its whole-piece allowance, modeled dressed dimensions, linear length and solid-volume workflow. Use the Cubic Feet Calculator for supported general geometric shapes or known-volume conversions. Neither tool replaces a cutting plan, grade check or structural assessment. Record the basis of the tool you use rather than treating all outputs as interchangeable purchasing instructions.
- Identify the supplier quotation, material description or measurement record that establishes the dimension basis.
- Confirm thickness, width, length and units for every line. Distinguish nominal labels from measured sizes.
- Count only identical boards together; separate different sizes and lengths.
- Check one per-board calculation manually before accepting the line subtotal.
- Review the unrounded combined tally and any separately agreed commercial rounding.
- Keep BF and MBF labels attached to quantities and rates. A per-MBF rate uses a thousand-board-foot denominator.
- Copy the tally with its input sizes and notes into the agreed project record; compare delivery documents on the same basis.
Civilable’s daily report generator can record material arrivals and observations. Keep the tally, purchase order, delivery ticket and any inspection record identifiable. A difference between a measured geometric equivalent and a supplier tally does not by itself establish a delivery discrepancy.
Software scope and precision
Use one to six lines. Counts must be whole numbers from 1 to 10,000 per line; dimensions must be positive unsigned decimals with no more than 18 decimal places and no greater than 100 m each. The combined tally is limited to 1,000,000,000 BF. Optional line names are limited to 80 characters and notes to 500. These software limits are not recommended board sizes or permitted structural spans.
Decimal dimensions and unit conversions use rational arithmetic. Results display up to six decimal places, or scientific notation for very small positive values; copies use 15 significant digits. Greater numerical precision does not improve a measurement’s accuracy. Changing any entry clears the stale result until you calculate again.
Does one board foot always mean one foot of board length?
No. Board feet incorporate thickness, width and length. One linear foot can represent different BF amounts for different cross-sections.
Should I enter nominal or actual dimensions?
Enter the dimensions applicable to the purpose and agreed measurement basis. Use the supplier’s stated tally dimensions for that tally, or measured rectangular dimensions for a geometric equivalent. The tool does not decide a contractual or grading convention.
What does MBF mean here?
One MBF equals 1,000 BF. The tool displays both quantities explicitly; confirm the denominator attached to a quoted rate.
Can I use this to estimate board feet in standing trees or logs?
No. This is a rectangular-board tally. It does not apply Doyle, Scribner, International or another log-scaling method, and it does not estimate sawmill recovery.
Sources and technical review
The board-foot definition and dimensional formula can be checked in Mississippi State University Extension’s forestry measurement publication. The distinction between product tally dimensions and physical cubic volume is illustrated by USDA Forest Service Research Paper PNW-333, pages 10–11 of the report. That research is historical context, not a current universal sales rule. Sources were consulted on 14 November 2026; they do not endorse Civilable. Examples are fictional arithmetic scenarios. Technical review completed by Riya Kulkarni | BE Civil Engineer; completion confirmed on 14 November 2026; software verification does not constitute grading, contractual or engineering approval.