Gravel quantity from coverage and depth
Choose rectangular or circular dimensions, or enter a known total coverage area. Multiply coverage by the uniform layer depth to obtain geometric gravel volume. Identical areas can be repeated in dimensions mode. The known-area mode treats your entered area as the full total.
Volume formula and worked example
Rectangle coverage = length × width. Circular coverage = π × diameter² / 4. Base volume = total coverage × depth. Volume including extra = base × (1 + extra / 100).
A 12 ft × 9 ft area at 3 in depth has 108 ft² coverage and 0.25 ft depth. Base volume = 108 × 0.25 = 27 ft³ = 1 yd³ = 0.764554857984 m³. An optional 10% extra gives 29.7 ft³ = 1.1 yd³.
Optional weight from a supplied bulk density
Enable the weight estimate only when you have a bulk density for the gravel and material condition being estimated. No density is prefilled. Weight is volume × bulk density, with units converted consistently. The density applies to the volume including any extra percentage.
Example only: if the supplier gives 100 lb/ft³ for the same volume condition, the 27 ft³ example weighs 2,700 lb = 1.35 US short tons = 1,224.699399 kg. This example value is not a default or a universal gravel density.
Loose and placed conditions must match
Bulk density includes the spaces between particles. It differs from the particle density or specific gravity of the stone itself. Loose, compacted and moisture conditions affect the relationship between volume and weight. Use a supplier value that matches the estimated volume and moisture basis.
This calculator does not automatically convert a compacted target layer into a loose delivery quantity. The extra-volume field is a direct percentage increase, not a physical compaction model. Agree any adjustment with your supplier or project team and use a matching density for that adjusted volume. Avoid adding an allowance again if it is already included.
Density units and ton definitions
Supported density units are lb/ft³, kg/m³ and US short tons/yd³. A US short ton is 2,000 lb = 907.18474 kg. A metric tonne is 1,000 kg. The result shows both, with explicit labels, so they are not confused.
For lb/ft³, pounds = cubic feet × density. For kg/m³, kilograms = cubic meters × density. For US short tons/yd³, short tons = cubic yards × density. One pound equals 0.45359237 kg.
Units, rounding and ordering
Changing a dimension unit converts its value. Feet/inches and metric buttons convert the length measurements, including depth. Known-area and density selectors retain their numeric values; choose the units that match your source data. Use decimals instead of fractions.
Results display up to three decimals using unrounded calculations. This tool does not round to bags, truckloads, supplier increments or minimum orders, and does not calculate cost. Confirm your final quantity, product grading, material condition and delivery arrangements with the supplier.
References