The RCC Concrete Quantity Calculator organizes a rectangular reinforced-concrete takeoff by member. Enter slabs, beams, columns, footings, walls or other rectangular members, then review row totals and category subtotals. RCC identifies the intended construction context; this calculator measures concrete geometry and does not design reinforcement or derive steel quantities.
Set non-overlapping measurement boundaries first
One physical volume must be counted once. If a slab is measured over its full plan area and thickness, a beam row beneath that slab can use the drop below the slab instead of the full beam depth. Alternatively, a different non-overlapping breakdown can be used, but its boundaries must be explicit. The calculator does not know where members intersect and cannot detect duplicated volume.
Column height, beam length and footing boundaries also need a consistent convention. A column extending into a beam or footing can overlap volume already counted elsewhere. Use appropriate clear dimensions or an explicit deduction and record the approach in Measurement scope notes. Do not subtract the same intersection both through reduced dimensions and through a deduction.
Member formula and deduction convention
Every row is a rectangular prism: gross volume per member = length/height × width × depth/thickness. Net row volume = (gross volume per member − deduction per member) × identical member count. Deduction is a volume for one member, not for the complete row. For four identical members, a deduction of 0.1 m³ per member removes 0.4 m³ from the row.
The member category only groups the results; changing Slabs to Columns does not reinterpret dimensions or apply a design rule. Length/height is the first prism dimension, width the second and depth/thickness the third. For a rectangular column, height can occupy the first field and the two plan dimensions the other fields.
Combine rows and apply one allowance
Sum the net row volumes, then apply the global allowance once: total = combined net volume × (1 + allowance / 100). Member and category subtotals are shown before the global allowance. Keep that distinction when reconciling the worksheet; category subtotals will equal the base net total, not the allowance-adjusted total.
The starting allowance is zero. Enter a project-specific allowance only when needed and not already included in the dimensions or deductions. There is no automatic supplier order increment, truck count, pour allocation or separate allowance for each category. Use separate worksheets where mixtures, pours or ordering requirements differ.
Worked US example
The illustrative slab is 20 ft × 12 ft × 4 in = 80 ft³. Two beam drops, each 20 ft × 12 in × 8 in, add 26.666666… ft³. Four clear-height columns, each 8 ft × 12 in × 12 in, add 32 ft³. Four rectangular footing blocks, each 3 ft × 3 ft × 1 ft, add 36 ft³. With no deductions, the total is 524/3 ft³, approximately 174.667 ft³ or 6.469 yd³.
The example assumes the member boundaries do not overlap; these are arithmetic dimensions, not an approved structural arrangement. Adding a separate 5% global allowance gives exactly 183.4 ft³, approximately 6.793 yd³. The slab, beam, column and footing subtotals remain before allowance.
Worked metric example
A 5 m × 4 m × 0.15 m slab contains 3 m³. Two 4 m × 0.3 m × 0.45 m beam drops contain 1.08 m³. Four 2.5 m × 0.3 m × 0.3 m columns contain 0.9 m³. Four 1.2 m × 1.2 m × 0.4 m footings contain 2.304 m³. The combined net volume is 7.284 m³; a 5% global allowance gives 7.6482 m³ before display rounding.
Reinforcement, openings and measurement rules
No deduction for reinforcement is made automatically. Nor does the worksheet apply a jurisdiction’s or contract’s measurement/pay-item rules. Decide which geometric deductions belong in this takeoff using the project’s measurement basis; contractual payment quantities may differ from a procurement geometry worksheet. Do not assume that every embedded item or small opening should be deducted.
Only entered rectangular geometry and explicit volume deductions are included. Irregular, tapered, circular or sloping members require an appropriate separate geometry calculation or a justified decomposition. Use the Concrete Column Calculator for supported circular columns, or the Concrete Calculator for its supported shapes. Do not approximate a cylinder as a square prism without documenting that assumption.
Precision and supported inputs
Mixed length units are converted using exact decimal factors. Decimal fractions are retained through dimensions, deductions, repeated counts and allowance; display rounds to three decimals, with scientific notation for positive values below 0.001. A cubic yard is exactly 27 ft³ and 0.764554857984 m³. Unit selectors retain the entered number; change the numeric value yourself when switching to an equivalent unit.
Use 1–20 rows with nonblank names up to 80 characters and scope notes up to 500 characters. Each dimension must normalize to 0.000001–1,000,000 ft, and count must be a whole number from 1 to 10,000. Each deduction must be zero or positive and strictly smaller than that member’s gross volume. Dimensions and deductions allow 18 decimal places and 40 trimmed characters. Allowance accepts 0–100% with four decimal places. The allowance-adjusted total is capped at 1 billion ft³. These are software bounds, not approved construction sizes.
Frequently asked questions
Does RCC volume include a reinforcement schedule?
No. Concrete volume does not determine bar diameters, spacing, hooks, laps or cutting lengths. Use the approved drawings and the appropriate reinforcement quantity process.
Should beam depth include slab thickness?
Only if that slab volume is not already counted elsewhere. The example uses a full slab and beam drops below it. Choose one consistent non-overlapping measurement convention and document it.
Can I use the same row for different member sizes?
No. Count repeats an identical geometry and deduction. Add separate rows when dimensions or deductions differ; identical names do not merge rows.
Can I price this quantity?
Transfer the appropriate quantity to the separate Concrete Cost Calculator with your supplier information. Avoid applying allowance again if it is already included. Supplier ordering and structural approval remain separate.