Formula and worked example
Finished volume = coverage area × target finished depth. For feet and inches: cubic yards = area in square feet × depth in inches ÷ 324. A 12 × 9 ft area with a new 6-inch layer needs 54 ft³, or 2 yd³, before adjustment. This starting depth is an example, not a recommended specification.
Choose the adjustment basis
Extra-volume allowance: estimated quantity = finished volume × (1 + percentage / 100). Adding 20% to 2 yd³ gives 2.4 yd³.
Loss of loose volume: estimated loose quantity = finished volume ÷ (1 − percentage / 100). If 20% of the initial loose volume is lost after placement, 80% remains. To obtain 2 yd³ finished, estimate 2 ÷ 0.8 = 2.5 yd³ loose. Multiplying 2.5 by 0.8 checks the finished target of 2 yd³.
The percentage starts at zero. Obtain an appropriate factor and its definition from your supplier or project team. Apply one basis only. This mathematical scenario does not predict settlement, specify compaction or establish soil suitability.
Coverage, units and limits
Use rectangle length × width, or π × diameter² ÷ 4 for a circle. Repeated areas must be identical and non-overlapping. Known coverage is the total area, so it is not multiplied by the hidden quantity field. Use net coverage after deductions; split varying depths into separate estimates. Enter the new layer depth, not the existing soil depth.
1 yd³ = 27 ft³ = 0.764554857984 m³. Inputs accept finite decimal values, positive coverage and depth, and whole repeated quantities from 1 to 10,000. Extra allowance permits 0–100%; loose-volume loss must be below 100%. Extremely large estimates are rejected. Results display up to three decimals while calculation uses unrounded values. Confirm supplier order increments separately.
What this estimate excludes
No generic density, weight, bag count, price, excavation, soil swell or hauling capacity is assumed. Moisture, handling, soil composition and actual placement can change supplied and finished quantities. Confirm measurements and material requirements before ordering.
References
Texas AgriLife Extension: How much compost, soil or mulch do I need to purchase? provides the area × depth ÷ 324 volume relationship. NIST SP 811 conversion factors supplies the unit basis. These references do not supply the user’s settlement percentage.